Skip to main content

HEAT PUMP //

MAINTENANCE

Commercial Heat Pump Services, Maintenance & Repairs

To keep your heat pump in proper condition and continue your lowered energy efficiency levels, you need regular heat pump maintenance.

As part of our comprehensive heat pump service, we provide maintenance after we install one of our CO2 heat pumps in your facility. If you have one of our qualified engineers inspect your system yearly, you’ll prolong the life of your heat pump system.

Oak 250kw Green

CO2 HEAT PUMP MAINTENANCE

Not only are CO2 heat pumps energy-efficient and environmentally sustainable, but they also require little maintenance to stay in top-performing condition. For the maintenance they do need, our experts are happy to service your CO2 heat pumps. As the property owner, you can check that airflow isn’t blocked by dust or debris, power off the system, occasionally clean the fan blades, or replace the filters when needed.

When you purchase one of our after sales support packages, we’ll provide yearly checks of your heat pump system. These assessments include checking the refrigerant pressure, looking for leakage in the ducts, measuring proper airflow, inspecting electrical contacts, evaluating the reverse cooling and heating controls, and much more.

HEAT PUMP AFTER SALES SUPPORT

Although we pride ourselves on our design, manufacture, and installation expertise of CO2 heat pumps, we know that ongoing maintenance is a necessity to keep your heat pump system in good working order. With one of our after sales support packages, you’ll get more than just a warranty. We also provide 24/7 service engineering support, access to Clade’s technical helpdesk, and commissioning engineer attendance. We’ll be there to offer needed maintenance, support, and software upgrades throughout the system’s lifecycle. Our packages start from 12 months and can extend several years, depending on your requirements and preferences.

Also, keep in mind that we can only extend these support services to Clade CO2 heat pump products.

OTHER HEAT PUMP SERVICES

Our heat pump maintenance is a standalone service, but we also offer it as part of our comprehensive design, manufacture, and installation service. If you require a bespoke CO2 heat pump system, we can design it and install it exactly to your requirements. We also offer installation and maintenance on our premade Clade heat pump systems if you select one of those instead. No matter your building or property type, we have the experience and skillset to deliver high-quality heat pump systems that enhance your energy efficiency.

DESIGN

Our heat pumps are designed for energy efficiency and high performance in both smaller spaces and larger properties.

MANUFACTURE

High-quality products require high-quality manufacturing. We use precise engineering and the highest quality materials to supply heat pumps optimised for long-term performance.

INSTALLATION

We provide full installation of your new heat pump. Our installation team causes as minimal disruption to your property as possible and ensures your heat pump is fully functional before leaving the site.

HEAT PUMPS WE MANUFACTURE

Clade heat pumps lead the industry in sustainability and are available for various sectors, including agriculture, commercial, data centres, residential, and industrial and manufacturing. Browse our range of heat pumps, made in the UK.

OAK CO2 HEAT PUMP

The Oak is our mid-scale CO2 heat pump design. It is suitable for continuous operation and at higher heating capacities for large buildings or processes for example; swimming pools, food production, district heating and factories.
Designed and built to be fully serviceable.

BEECH CO2 HEAT PUMP

The Beech is our largest CO2 heat pump, bespoke designed and manufactured for each project. Up to 1.4MW in a single unit and encompassing ground, air, water source as well as heat reclaim. Installed as separate evaporators and compressor stations with either glycol or refrigerant connections.

ASPEN HEAT PUMP

The Aspen is our hydrocarbon heat pump for smaller applications up to 200KW. Aspen is a more affordable low carbon solution for lower flow temperature but still delivering superb low-carbon heat service and a low GWP refrigerant.

ABOUT US

Clade is the UKs leading manufacturer of natural refrigerant heat pumps. With significant R&D, field trials and a proven deployed portfolio of over 500 natural refrigerant appliances there are no other UK manufacturers that come close to our expertise and experience.

Operating on a national basis from our green manufacturing Technology Centre in Leeds and our Head Office in Bristol, which has achieved CEEQUAL status and the internationally recognised BREEAM Excellent standard, we design, manufacture, supply and maintain heat pumps and refrigeration around the world.

Trios

“Over the past year TRIOS and Clade Engineering Solutions have worked closely together in delivering service to a range of retail and non-retail customers. Clade has proven to be a reliable partner and demonstrated its ability to react quickly and efficiently to customer requests and problems. Through system usage and great communication Clade has rapidly evolved as a partner of choice to TRIOS. The fact that Clade has both service and installation capabilities has given TRIOS confidence that we can rely on them in every situation, where our customers have a refrigeration or mechanical problem. Clade repeatedly demonstrates its customer focused credentials and continues to give great focus and service to TRIOS and our customers.”

Jeff Alden – Managing Director, Trios Group

Wm. Morrison Supermarkets Plc

“Clade have completed new installations on large stores, and refurbishment work within our main estate, and have many more planned in the future.

Their communication, efficiency and can do attitude make them a key strategic partner in our future within both M-Local and main estate. The key to their success with Morrisons is their transparency, and honesty. Nothing is hidden, and no conversations are off limits, they, as a team, are willing to bring new ideas to the table to make efficiencies, and also accept learnings from other teams to improve themselves.

I have absolutely no qualms in recommending them for any work, and hope that you consider them as the added benefit they can bring is invaluable.”

Tom Monaghan – Construction PM & Programme Manager, Wm Morrison Supermarket

M&S

“Clade have proved themselves to be a competent and diligent contractor for Marks and Spencer, their work has been delivered to a high standard with quality being the focus. Their deliver of M&S high profile stores has surpassed performance expectations. Clade has proved itself as a growing contractor with a bright future.”

Peter Garner – Marks & Spencer

CTS Shopfitting Ltd

“We have worked with Clade on numerous Co-op projects throughout many years and find them to be very professional and reliable with excellent communication both on and off site. The project management team work alongside ourselves and are very proactive when required.”

Martyn Clark – CTS Shopfitting Ltd

Key Property Solutions Ltd

“Thank you for the excellent work you did at M-Local Doncaster. It made a refreshing to change to come across a contractor who could adapt to change as speedily as yourselves and reacted pro-actively to anything that was required. I look forward to working with Clade again in the future.”

Lol Johansen – Key Property Solutions Ltd (Bowmer & Kirkland subsidiary)

Co-op

“Clade Refrigeration (now Clade Engineering Solutions) has worked for The Co-operative Group for over 12 years. In this period they have delivered a large number of projects, some of these being high profile developments which have been installed to a very high standard indeed. Their willingness to help and Give support to the client, associated suppliers and the wider industry is noticeable, whilst they also take the time to give valuable feedback on new innovations and products. They have proved themselves in all instances to be a partner and a contractor that repeatedly delivers to the highest standards.”

Bill Watson – The Co-operative Group

HEAT PUMPS FAQ

Clade Engineering is able to provide heat pumps as either air, ground, or water source. The most suitable type of heat pump depends on several factors related to your property. Generally, air source heat pumps are the most popular because they have the fewest requirements to install. Any type of heat pump can provide hot water and heating to your building.

Heat pumps using CO2 refrigerant as the heat source are friendly to the environment because the CO2 they use stays contained within the appliance and does not get released into the atmosphere. Furthermore, the CO2 we use in our heat pumps has the lowest global warming potential (GWP) of 1 compared to 1000’s for other refrigerants which will all significantly reduce the carbon footprint of your building.

Clade are the industry leaders in heat pump technology. As the heat in buildings challenge became clearer, Clade began the R&D for a new range of heat pumps which would provide a solution for a growing market. The first heat pump was installed in a Co-Op store and achieved a staggering SCOP of 3.7. We have over 36 years of experience and all of our systems are designed and manufactured in the UK.

Our heat pumps meet environmental standards by using a natural refrigerant like CO2. It has a Global Warming Potential (GWP) of 1, which reduces both cost and emissions.

Clade offers a full start to finish heat pumps solution. Our team of engineers design your system, manufacture and supply your heat pumps from our product range, our installation team ensures your heat pump is fully functional and our after sales support team provides ongoing maintenance. You can pick and choose as many or as few of our services to suit your requirements.We ensure that your heat pump system continues to function. Our heat pumps can generate heat from 50kW to multi mega-watt, with a maximum water temperature of over 80 degrees Celsius and a minimum external air temperature of -20 degrees Celsius. Each of our heat pumps also comes with total cooling recovery to ensure a high quality of continued functionality.

CONTACT US

Speak with our team of experts and discuss your requirements. Complete this quick form and we will be in touch or contact us using:

0113 887 9604

enquiries@clade-es.com

Bristol & Bath Science Park
Dirac Crescent, Emersons Green
Bristol, BS16 7FR