Heat Pumps //

Clade Heat Pumps CO2 Heat Pumps Commercial Heat Pumps Agriculture Heat Pumps Data Centre Heat Pumps Residential Heat Pumps Industrial Heat Pumps

Refrigeration //

Clade Refrigeration CO2 Refrigeration Agriculture Convenience Retail Commercial & Industrial Supermarkets & Hypermarkets

The Energy Transition //

The Energy Transition Smart Cities

About Us //

About Clade Testimonials Case Studies How We Work Environmental Social & Corporate Governance History Management Team Careers Investor Relations The Social Housing Decarbonisation Fund News Blog

//

Testimonials Case Studies

Heat Pump //

Design

Heat Pump Designers

We design heat pump systems that improve the efficiency of your property, whether it’s residential, agricultural, commercial, or industrial. With heat pump installations tailored specifically to your business, we’ll design a system that meets all your requirements. From research and design through to the installation and hand over, we’ll provide bespoke heat pump design services to match your needs.

Contact Us
Call Us

Our Heat Pump System Design Process

Our heat pump design process is thorough. We prioritize research, and our designers spend ample time planning and gathering specifications before they even start designing your new heat pump system. We’ll conduct site visits and consult with you extensively, to ensure we have every detail covered before we create your bespoke heat pump system. Our vetted research and design process helps us overcome any technical issues with ease, meet standards or regulatory requirements, or integrate your new heat pump into existing systems. During the design, installation, and hand over phases, we spend as much time as needed to get your new system exactly right.

Research and Design

In our design process, research and attention to detail are paramount. We want to gather as much information as possible before we start planning any part of your new heat pump system. We’ll communicate with you frequently to ensure we have what we need to proceed.

Installation

We require your sign-off on the design before we begin installation. We’ll ask you to confirm that the heat pump system we’ve designed is suitable, then start with installation works. If we’re integrating with a new system, we will require your approval before beginning that as well.

Hand Over

We will complete installation, do a systems check, then and do a full walkthrough with you. Our experts will show you how everything works and ensure you understand the maintenance and upkeep needs of your new heat pump system.

Why Clade Engineering?

Clade are industry leaders in sustainable and energy-efficient heating and cooling. With over 30 years’ experience in the refrigeration sector, we’ve developed carbon reduction solutions that have helped lower both energy bills and carbon emissions for our customers. We use our engineering expertise to support your transition to natural refrigeration methods. Our industry specialists have worked on many projects in multiple sectors and taken great strides to deliver natural refrigerant technology and decarbonisation to our customers. With our years of experience, innovation, and precise attention to detail, we’re the best choice for your property’s new heat pump system.

In the heat pump design process, we conduct thorough evaluations and carry out attentive research, incorporating some of the following factors:

  • Building specifics such as size, age, layout, and access points
  • Type of property (residential, commercial, industrial, etc.)
  • Specific points of ventilation, infiltration, and heat gains and losses
  • The presence of existing systems
  • Impact on the environment
  • Timeline and budget
  • System scalability and future-proofing
  • Adherence to relevant regulations and legislation
Contact Us
Call Us

Other Heat Pump Services

As experts in the heating and cooling sector, we’re able to provide several services to our customers in addition to design. We can manufacture heat pumps to your specifications, install new systems, and provide ongoing maintenance to ensure everything continues to run smoothly. We’ll ensure that you have full control over the temperature of your workplace, factory, or home, whilst using an energy-efficient heat pump system. At Clade, our priority is always delivering effective solutions.

Manufacture

High-quality products require high-quality manufacturing. We use precise engineering and the highest quality materials to supply heat pumps optimised for long-term performance.

Heat Pump Manufacturers

Installation

We provide full installation of your new heat pump. Our installation team causes as minimal disruption to your property as possible and ensures your heat pump is fully functional before leaving the site.

Heat Pump Installers

Maintenance

Clade provides ongoing maintenance for our heat pumps, which includes regular surveys and repair services. You can customise your support with our After Sales Support packages as well.

Heat Pump Maintenance

Browse Our Heat Pumps

Clade heat pumps lead the industry in sustainability and are available for various sectors, including agriculture, commercial, data centres, residential, and industrial and manufacturing. Browse our range of heat pumps, ready made to integrate into your heat pump system design.

ROWAN HEAT PUMP

The Rowan is our smaller heat pump, suitable for lower heat capacities. Its compact design makes it suitable where space is limited. It can be skid mounted with a thermal store or with heat exchangers to reclaim heat from a refrigeration system for example.

Rowan Data Sheet

OAK HEAT PUMP

The Oak is our mid-scale heat pump design. It is suitable for continuous operation and at higher heating capacities for large buildings or processes for example; swimming pools, food production, district heating and factories.
Designed and built to be fully serviceable.

Oak Data Sheet

BEECH HEAT PUMP

The Beech is our largest heat pump, bespoke designed and manufactured for each project. Up to 1.4MW in a single unit and encompassing ground, air, water source as well as heat reclaim. Installed as separate evaporators and compressor stations with either glycol or refrigerant connections.

Beech Data Sheet

ASPEN HEAT PUMP

The Aspen is our hydrocarbon heat pump for smaller applications up to 150KW. Aspen is a more affordable low carbon solution for lower flow temperature but still delivering superb low-carbon heat service and a low GWP refrigerant.

Aspen Data Sheet

Trios

“Over the past year TRIOS and Clade Engineering Solutions have worked closely together in delivering service to a range of retail and non-retail customers. Clade has proven to be a reliable partner and demonstrated its ability to react quickly and efficiently to customer requests and problems. Through system usage and great communication Clade has rapidly evolved as a partner of choice to TRIOS. The fact that Clade has both service and installation capabilities has given TRIOS confidence that we can rely on them in every situation, where our customers have a refrigeration or mechanical problem. Clade repeatedly demonstrates its customer focused credentials and continues to give great focus and service to TRIOS and our customers.”

Jeff Alden – Managing Director, Trios Group

Wm. Morrison Supermarkets Plc

“Clade have completed new installations on large stores, and refurbishment work within our main estate, and have many more planned in the future.

Their communication, efficiency and can do attitude make them a key strategic partner in our future within both M-Local and main estate. The key to their success with Morrisons is their transparency, and honesty. Nothing is hidden, and no conversations are off limits, they, as a team, are willing to bring new ideas to the table to make efficiencies, and also accept learnings from other teams to improve themselves.

I have absolutely no qualms in recommending them for any work, and hope that you consider them as the added benefit they can bring is invaluable.”

Tom Monaghan – Construction PM & Programme Manager, Wm Morrison Supermarket

M&S

“Clade have proved themselves to be a competent and diligent contractor for Marks and Spencer, their work has been delivered to a high standard with quality being the focus. Their deliver of M&S high profile stores has surpassed performance expectations. Clade has proved itself as a growing contractor with a bright future.”

Peter Garner – Marks & Spencer

CTS Shopfitting Ltd

“We have worked with Clade on numerous Co-op projects throughout many years and find them to be very professional and reliable with excellent communication both on and off site. The project management team work alongside ourselves and are very proactive when required.”

Martyn Clark – CTS Shopfitting Ltd

Key Property Solutions Ltd

“Thank you for the excellent work you did at M-Local Doncaster. It made a refreshing to change to come across a contractor who could adapt to change as speedily as yourselves and reacted pro-actively to anything that was required. I look forward to working with Clade again in the future.”

Lol Johansen – Key Property Solutions Ltd (Bowmer & Kirkland subsidiary)

Co-op

“Clade Refrigeration (now Clade Engineering Solutions) has worked for The Co-operative Group for over 12 years. In this period they have delivered a large number of projects, some of these being high profile developments which have been installed to a very high standard indeed. Their willingness to help and Give support to the client, associated suppliers and the wider industry is noticeable, whilst they also take the time to give valuable feedback on new innovations and products. They have proved themselves in all instances to be a partner and a contractor that repeatedly delivers to the highest standards.”

Bill Watson – The Co-operative Group

CONTACT

GET IN TOUCH